| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Suspension | Section: Suspension Control System | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001NKV002X |
| Title: SUSPENSION CONTROL: HEIGHT CONTROL COMPRESSOR: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL HEIGHT CONTROL COMPRESSOR BRACKET
(a) Install the height control compressor bracket with the 3 bolts.
Torque: 5.9 N·m (60 kgf·cm, 52 in·lbf)
|
(b) Connect the wire harness clamps. |
2. INSTALL HEIGHT CONTROL FILTER
(a) Install the height control filter with the 2 bolts.
Torque: 6.4 N·m (65 kgf·cm, 57 in·lbf)
(b) Connect the 2 hoses.
3. INSTALL HEIGHT CONTROL NO. 1 COMPRESSOR
(a) Install the height control compressor with the 3 bolts.
Torque: 29 N·m (296 kgf·cm, 21 ft·lbf)
(b) Connect the height control tube
.
(c) Connect the 2 wire harness connecors.
(d) Connect the hoses with 4 new clips.
(e) Install the compressor cover with new 3 clips.
4. INSTALL REAR BUMPER COVER
|
|